Malaysia Pellet Plant Widely Using Wood Pellet Production Line
Complete biomass pellet production line is designed for industrial
production to make biomass pellets from any type of agro and
forestry wastes. The finished wood pellets are widely used for
heating purposes of industrial boilers and large power plants as
well as home use to alleviate the energy crisis and meet
1. Raw materials preparation
The raw material to make wood pellets is always wood logs, wood
shavings, wood sawdust, wood chips, biomass straw, forest waste
2. Crushing section
Crushing machine is used for crushing the larger materials into
smaller powder for supporting produce wood pellets. We always use
the hammer mill crusher to crush wood chips, straw etc, if the
material is wood logs or other big wood, we advise to use the wood
chipper to chip them first.
3. Material drying section
The moisture of the material for crushing is within 30%, and the
moisture for pelletizing is within 15%.
So before pelletizing, a drying machine is needed to make the
moisture content reaches the required standards.
4. Pelletizing section
The cooling machine is used to reduce pellets surface temperature
and the moisture content which makes the wood pellets easy to
store, meanwhile helps screen good and pure pellets.
5. Pellet packing section
Packing section is necessary to protect the wood pellets from the
damp, and easy to store.
1. Q: General questions to design the production line for you?
A: 1. What is your raw materials? (to confirm mould pressure ratio
of machines )
2. What is the moisture content of your raw material?
3. How many output capacity do you want per hour / month/ year?
Note: If the moisture is high, you need a dryer, becuase the
suitable moisture content to enter hammer mill is 30%. And please
provide us above detailed information, then we would design the
most suitable production line with reasonble offers.
2. Q: How long is your guarantee?
A: 12 months warranty but except quick waering parts.
3. Q: Will you send engineers to install the machines?
A: Of course. Our company has professional installation engineers
team and specialized after-sale service team. When the machines
arrive your factory, we will send our installation engineers to
your factory at once. Our engineers will help you to install the
machines and training your workers how to operate the machines and
mentain the machine,
4. Q: Voltage requirement ?
A: Our machines can use 380V, 220V, 240V, 415V, 480V, and 50Hz,